• 2020/12/17

The manual technique is straightforward

引用本文加入書籤轉寄本文


The manual technique is straightforward, but only realistic forlow-volume output. This really is because quality and accuracy can differ from worker to worker-and even by the very same worker from your begin to the tip of her or his shift.

The solder dip machine features compact structure and small footprint, with efficiency and uniform temperature, the machine makes a great factory component.Automatic wire tinning is more advanced and expensive, but it ensures repeatable and uniform protection on big quantities of wires. Boyd suggests that all wires tinned on automatic tools are straight away all set for soldering to your termination website.Released in excess of thirty several years ago, automatic tinning machines feature pumps that pump flux and solder at different areas within a downwardly flowing stream. A built-in gripper grips the wire and moves it into equally stations sequentially to leave a coating of solder on the wire.

Get involved in the micro bit coding, board and programing initiative.Within the early 1990s for the early 2000s, Komax created personalized automated tinning stations for purchasers on desire. Then in 2003, the corporate introduced its IOC785 electric powered module as an choice for automated cut-strip-and-crimp equipment. The module is situated following the wire stripping function.The operator activates the unit so its tin container warms up. After closing the module’s protection protect, the unit’s variable velocity pump creates a gradual stream of solder compound that flows downward right into a reservoir.

Tinning occurs in a couple of seconds, and consists of preprogrammed grippers grabbing a wire, promptly swiveling its stripped conclusion via the flux container, and afterwards quickly passing the wire conclude as a result of the flowing solder.The pump’s adjustable speed and exact temperature control makes sure repeatable and significant good quality tinning of all stranded wires. Equally helpful is usually a specially designed pump channel, which optimizes solder movement so there is certainly negligible slag development. The module also permits the use of lead-free tin to limit part have on, attributes quick-change fittings for rapid and successful setup, and can be dismantled without the need of resources. The latter reward drastically lessens cleaning time.

0
0

複製引用網址

回應
共 0 筆

我要留言* 必填
鉅亨網【部落新世界Blog】 Email:
(建議填寫,版主回覆會用郵件通知您)
鉅亨網【部落新世界Blog】 記住我的個人資料:
鉅亨網【部落新世界Blog】 私密留言:僅提供會員使用,如欲使用私密留言請先 登入會員
鉅亨網【部落新世界Blog】 留言內容:【限制 1000 個字元】
鉅亨網【部落新世界Blog】 認證碼:

hunuec
  • 暱    稱:hunuec 
  • 部落分類:  
  • 我的好友們(0
  • 誰加我為好友(0
  • 我的收藏部落(0
  • 姓名: 
  • 自我介紹: 

《MORE》

17

本日人氣:0
累積人氣:587